![]() |
|
Builder's Corner Restoration and preservation. Keep them running in perfect shape. What size is your bottom bracket? |
![]() |
|
Thread Tools | Search this Thread | Display Modes |
![]() |
#1 |
New Member
Join Date: August 12th, 2006
Location: North Yorkshire
Posts: 7
|
![]()
Just been faced with removing the BB bearings, have removed Allen bolted spacers and tapped the spindle out, which was pretty straight forward, now need to remove the bearings, looks like a case of removing the "C" clips and tapping the bearings out?
Don't want to just hit it with a hammer, they are the original bearings and seem fine, but there must be a correct way to remove them? Thinking of replacing them with old Pace RC100 press fit bearings and running a Bullseye crank, anybody done something so "bold" ![]() Just got my hands on a '91 Wicked Lite and want to treat it right |
![]() |
![]() |
![]() |
#2 | |
Senior Member
Join Date: June 1st, 2006
Location: rio de janeiro
Posts: 1,043
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
#3 |
New Member
Join Date: August 12th, 2006
Location: North Yorkshire
Posts: 7
|
![]()
You will have to bear with me a little, I am new to this
![]() What are the main differences between a wicked and a wicked lite? |
![]() |
![]() |
![]() |
#4 | |
Senior Member
Join Date: June 1st, 2006
Location: rio de janeiro
Posts: 1,043
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | Search this Thread |
Display Modes | |
|
|