![]() |
|
Builder's Corner Restoration and preservation. Keep them running in perfect shape. What size is your bottom bracket? |
![]() |
|
Thread Tools | Search this Thread | Display Modes |
![]() |
#1 |
New Member
Join Date: July 31st, 2005
Location: Velp (NL)
Posts: 5
|
![]()
I recently bought a Yo Eddy frame without the rear brakestuds. I found a pair that fitted well,
but now it has not the little holes for the spring of the rear brake! How is this on the orginal Fat hardware? I really hope you guys can help me! |
![]() |
![]() |
![]() |
#2 |
New Member
Join Date: July 31st, 2005
Location: Velp (NL)
Posts: 5
|
![]()
I found something on velo-direct.ch , search on fat> you will see a couple of things!
They have 2 options for the brakestuds 5/16 or M10 thread, now which one do I need for a 1993 Yo Eddy?(Or how can I measure this?) Last edited by marinti; August 21st, 2005 at 4:46 AM. |
![]() |
![]() |
![]() |
#3 |
Member
Join Date: October 7th, 2004
Location: Wallingford, CT USA
Posts: 98
|
![]()
those are just washers with holes cut drilled in them, any good bike shop will have them.
It also depends on what brakes you use. I took the washers off. I am running avid tri-align, and those washers are not needed.
__________________
Wicked #341W11 |
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: July 16th, 2004
Location: S.Wales UK
Posts: 481
|
![]()
apparently c'dale canti studs fit...
__________________
ta scant |
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | Search this Thread |
Display Modes | |
|
|