![]() |
|
General Fat Chance Discussion Anything and everything about the best mountain bikes ever made. |
![]() |
|
Thread Tools | Search this Thread | Display Modes |
![]() |
#1 |
Member
Join Date: May 7th, 2012
Location: PA
Posts: 22
|
![]()
I'm just rounding the bend on a 93 Yo build. I have a Yo fork non-suspension correct I have been sitting on for years and was lucky to snag a Serotta Suspension corrected 1" fork (keep it in the family). The bike has 2.1's tires all around. My question is what bottombracket height should I be looking for to verify the bike really is suspension correct, I think1993 should be but you never know. Is that measured from the ground to the BB shell or ground to the center of the BB spindle and what is the magic number?
Thanks in advance... -John Y. |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: June 1st, 2006
Location: rio de janeiro
Posts: 1,043
|
![]()
ground to center of BB spindle> 11 7/8 in.
__________________
wanted: ride time. |
![]() |
![]() |
![]() |
#3 |
Member
Join Date: May 7th, 2012
Location: PA
Posts: 22
|
![]()
Cool,
Now is that going to be the numbers for suspension non-corrected Yo fork or suspension corrected Serotta fork? -Thanks |
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: June 1st, 2006
Location: rio de janeiro
Posts: 1,043
|
![]()
That's where the BB axle is supposed to be.
__________________
wanted: ride time. |
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | Search this Thread |
Display Modes | |
|
|