New Fat owner

Fatatious One · March 25th, 2013, 6:11 PM

Finally, I landed a Wicked Fat Chance after all these years. Traded some new stuff
for the bike. The s/n is : 07279W. Can any one tell me about the year it was made?
I will get a pic up this week for all to see. Thanks

fat-tony · March 26th, 2013, 8:09 AM

Quote:

Originally Posted by Fatatious One

Finally, I landed a Wicked Fat Chance after all these years. Traded some new stuff
for the bike. The s/n is : 07279W. Can any one tell me about the year it was made?
I will get a pic up this week for all to see. Thanks

Welcome to the family!

jonsonneborn · March 26th, 2013, 8:45 AM

Quote:

Originally Posted by Fatatious One

07279W.

Looks like you got yourself a 1989 21" Wicked, welded by Scott Bengston (i-robot on this forum) on June 21, 1989! Congrats. Let me know if that bike is too big; i've got a 19.5" made the same year that's a little too small for me.

Cheers, Jon

chainline · March 26th, 2013, 2:42 PM

Ok Jon, seeing your looking at the BOOK.... who tacked it ! hahaha !

Fatatious One · March 26th, 2013, 4:44 PM

Thanks to all of you, its really neat knowing the history of this bike. I stripped her down today. Heck of a time removing the BB Total rust, but frame is in decent shape.
Again I will get some pics up soon. Oh, and what are your thoughts on painting v. powder coat. I have a guy tellling me that the heat process used in powder coat will ruin the temper of the steel. ???

fat-tony · March 26th, 2013, 6:47 PM

Quote:

Originally Posted by Fatatious One

Thanks to all of you, its really neat knowing the history of this bike. I stripped her down today. Heck of a time removing the BB Total rust, but frame is in decent shape.
Again I will get some pics up soon. Oh, and what are your thoughts on painting v. powder coat. I have a guy tellling me that the heat process used in powder coat will ruin the temper of the steel. ???

From what I have been told, the powdercoating temperatures (300-400 degrees) are low enough that it does hurt the steel, but someone with more technical knowledge should chime in on this.

jonsonneborn · March 27th, 2013, 10:15 AM

Quote:

Originally Posted by chainline

Ok Jon, seeing your looking at the BOOK.... who tacked it ! hahaha !

SPB Tacked & Welded it

March 25th, 2013, 6:11 PM	#1
Fatatious One Member Join Date: March 25th, 2013 Location: So. Maine Posts: 21	New Fat owner Finally, I landed a Wicked Fat Chance after all these years. Traded some new stuff for the bike. The s/n is : 07279W. Can any one tell me about the year it was made? I will get a pic up this week for all to see. Thanks

March 26th, 2013, 2:42 PM	#4
chainline Senior Member Join Date: February 12th, 2010 Location: laconia Posts: 303	rk Ok Jon, seeing your looking at the BOOK.... who tacked it ! hahaha !

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

March 26th, 2013, 4:44 PM	#5
Fatatious One Member Join Date: March 25th, 2013 Location: So. Maine Posts: 21	Thanks to all of you, its really neat knowing the history of this bike. I stripped her down today. Heck of a time removing the BB Total rust, but frame is in decent shape. Again I will get some pics up soon. Oh, and what are your thoughts on painting v. powder coat. I have a guy tellling me that the heat process used in powder coat will ruin the temper of the steel. ???

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)