1989 Wicked

Jcassano · July 3rd, 2012, 6:17 PM

So many memories on this bike.

colker · July 5th, 2012, 3:02 PM

cool bike. the fact it carries sweet moments makes it everything any bike can be.

Jcassano · December 7th, 2012, 2:15 PM

Same bike after restoration.

Model: Wicked
year: 1989
Front Deraileur: XTR M900 Front Derailleur Bottom pull 28.6
Rear Deraileur: XTR RD-M910 8 speed
Shifters/Breaks levers: XTR ST-M900 Trigger Shifter Brake
Brakes: XTR M900 Cantilever
Cranks: XTR M900
BB: Phil Wood
Hubs: XTR M900
Headset: Ritchey Logic
Rims: Mavic 217 SUP UB
Bars and Stem: Klein Mission Control
Skewers: Ringle
Seat clamp: Ringle
Decals: Gil (UK)

I-ROBOT · December 8th, 2012, 8:04 AM

Nice job! Looks like my welds on the frame
Who made the bar/stem combo?
I re-did my Wicked in all black after the first paint job got chewed up - no decals though - we called it urban camoflage
Regards
Scott

jbrannsten · December 9th, 2012, 6:47 AM

Quote:

Originally Posted by I-ROBOT

Who made the bar/stem combo?

Looks like the Klein Mission Control that was used for their 1" frames (Pinnacle and Rascal).

Jcassano · December 10th, 2012, 6:17 PM

Scott....dig the welds. Yes, bars and stem are Klein Mission Control. Just procured a nice vintage Klein fork that I'll be painting and adding in the next few weeks. I'll post updated photos when it's done.

clockworkgazz · February 11th, 2013, 6:18 PM

Looks much better now and loving it's your original bike but not sure the Klein additions suit the bike- those forks look fine as they are. Love my 89 wicked.

clockworkgazz · February 11th, 2013, 6:20 PM

and what happened to those lush cook cranks? give them to me if you have no use for them

Jcassano · February 15th, 2013, 6:31 PM

Cook Cranks- the left side is cracked. I was sad all day when I noticed it.

moab89 · February 16th, 2013, 11:49 PM

Looks great. Who did the paint and what kind is it?

tvcreative · February 17th, 2013, 12:53 PM

what's holding your BB spindle in place?

no collars?

Jcassano · February 19th, 2013, 5:07 PM

Frame is powder coated, then decals applied, and finished off with a clear coat over the decals.

The spindle is held by loctite.

mainlyfats · February 19th, 2013, 7:20 PM

Quote:

Originally Posted by Jcassano

The spindle is held by loctite.

Really? You sure the Phil axle doesn't have inside shoulders?

yo-Nate-y · February 19th, 2013, 10:02 PM

Quote:

Originally Posted by Jcassano

The spindle is held by loctite.

Have you ridden it off-road yet?

Jcassano · March 9th, 2013, 12:31 PM

The bike rides amazing off road. Super light yet solid. The XTR components were well worth the investment. I wasn't sure how the Klein mission control would feel so I got current wide bars & stem with a 1" conversion as a back up. As it turns out the Klein set up feels great and stealthy so I have not tried the wide bars yet. I also got some prestine XTR V brakes I didn't use if anyone is interested. Other things I may part with are 1 original BB spindle collar, new bearings and spindle for cooks bros cranks set up. I also have a cooks bros crank set but the left arm has a crack where it sits on the spindle. PM me if interested in anything.

July 5th, 2012, 3:02 PM	#2
colker Senior Member Join Date: June 1st, 2006 Location: rio de janeiro Posts: 1,043	cool bike. the fact it carries sweet moments makes it everything any bike can be. __________________ wanted: ride time.

December 10th, 2012, 6:17 PM	#6
Jcassano Member Join Date: July 1st, 2012 Location: Orange county CA Posts: 38	Bars and Stem Scott....dig the welds. Yes, bars and stem are Klein Mission Control. Just procured a nice vintage Klein fork that I'll be painting and adding in the next few weeks. I'll post updated photos when it's done. Last edited by Jcassano; December 12th, 2012 at 2:26 PM.

February 16th, 2013, 11:49 PM	#10
moab89 New Member Join Date: June 6th, 2010 Location: Park City, UT Posts: 5	Restoration Looks great. Who did the paint and what kind is it?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

December 8th, 2012, 8:04 AM	#4
I-ROBOT Senior Member Join Date: January 7th, 2007 Location: Hudson, MA Posts: 426	Nice job! Looks like my welds on the frame Who made the bar/stem combo? I re-did my Wicked in all black after the first paint job got chewed up - no decals though - we called it urban camoflage Regards Scott

February 11th, 2013, 6:18 PM	#7
clockworkgazz Member Join Date: August 26th, 2009 Location: scotland Posts: 92	Looks much better now and loving it's your original bike but not sure the Klein additions suit the bike- those forks look fine as they are. Love my 89 wicked.

February 11th, 2013, 6:20 PM	#8
clockworkgazz Member Join Date: August 26th, 2009 Location: scotland Posts: 92	and what happened to those lush cook cranks? give them to me if you have no use for them

February 15th, 2013, 6:31 PM	#9
Jcassano Member Join Date: July 1st, 2012 Location: Orange county CA Posts: 38	Cook Cranks- the left side is cracked. I was sad all day when I noticed it.

February 17th, 2013, 12:53 PM	#11
tvcreative Senior Member Join Date: March 15th, 2010 Location: Naperville IL Posts: 716	what's holding your BB spindle in place? no collars?

February 19th, 2013, 5:07 PM	#12
Jcassano Member Join Date: July 1st, 2012 Location: Orange county CA Posts: 38	Frame is powder coated, then decals applied, and finished off with a clear coat over the decals. The spindle is held by loctite.

March 9th, 2013, 12:31 PM	#15
Jcassano Member Join Date: July 1st, 2012 Location: Orange county CA Posts: 38	The bike rides amazing off road. Super light yet solid. The XTR components were well worth the investment. I wasn't sure how the Klein mission control would feel so I got current wide bars & stem with a 1" conversion as a back up. As it turns out the Klein set up feels great and stealthy so I have not tried the wide bars yet. I also got some prestine XTR V brakes I didn't use if anyone is interested. Other things I may part with are 1 original BB spindle collar, new bearings and spindle for cooks bros cranks set up. I also have a cooks bros crank set but the left arm has a crack where it sits on the spindle. PM me if interested in anything.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)