Bottom Bracket for 92 Team Yo

pkvandeusen · November 5th, 2011, 12:11 PM

I've done some searching on the internet for the specific size needed for my bike but havent been able to find the right size. I have a Teal 92 Team Yo that I'm building up and want to order up a BBkt from Phil Wood, I have a set of ano-purple kooka kranks that are going to look righteous on that frame. Can anybody give me a hand with sizing up a bottom brakct.

fat-tony · November 5th, 2011, 4:28 PM

Quote:

Originally Posted by pkvandeusen

I've done some searching on the internet for the specific size needed for my bike but havent been able to find the right size. I have a Teal 92 Team Yo that I'm building up and want to order up a BBkt from Phil Wood, I have a set of ano-purple kooka kranks that are going to look righteous on that frame. Can anybody give me a hand with sizing up a bottom brakct.

I believe the shell on a Yo is 63mm, but you need to double check. I believe the axel length is dependent on your cranks.

pkvandeusen · November 5th, 2011, 9:34 PM

The shell can either be a 68 or a 73 not a 63 (I dont think at least) as for the cranks I mentioned that I have a set of vintage Kookas. So I still need to know shell size and spindle length for my 92 Yo team, thanks.

yo-Nate-y · November 5th, 2011, 9:53 PM

Should be 68mm, but why not measure it yourself and be sure?

Check the specs on BikePro for the spindle length for Kookas.
http://www.bikepro.com/products/bott...omptable.shtml

That's a good place to start, if anyone has run them on a Yo maybe they'll chime in.

November 5th, 2011, 12:11 PM	#1
pkvandeusen New Member Join Date: November 5th, 2011 Location: Larchmont NY Posts: 6	Bottom Bracket for 92 Team Yo I've done some searching on the internet for the specific size needed for my bike but havent been able to find the right size. I have a Teal 92 Team Yo that I'm building up and want to order up a BBkt from Phil Wood, I have a set of ano-purple kooka kranks that are going to look righteous on that frame. Can anybody give me a hand with sizing up a bottom brakct.

November 5th, 2011, 9:53 PM	#4
yo-Nate-y Global Moderator Join Date: March 12th, 2009 Location: Tucson Posts: 809	Should be 68mm, but why not measure it yourself and be sure? Check the specs on BikePro for the spindle length for Kookas. http://www.bikepro.com/products/bott...omptable.shtml That's a good place to start, if anyone has run them on a Yo maybe they'll chime in. __________________ 1975 Witcomb USA, 1981 Chris Chance; 1984 Fat Chance, 1987 Team Comp, 1991 Yo Eddy, Monster Fat, and Wicked ....happy to have finally found a clean 80s Fat Team Comp with a box crown fork

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

November 5th, 2011, 9:34 PM	#3
pkvandeusen New Member Join Date: November 5th, 2011 Location: Larchmont NY Posts: 6	The shell can either be a 68 or a 73 not a 63 (I dont think at least) as for the cranks I mentioned that I have a set of vintage Kookas. So I still need to know shell size and spindle length for my 92 Yo team, thanks.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)