![]() |
|
General Fat Chance Discussion Anything and everything about the best mountain bikes ever made. |
![]() |
|
Thread Tools | Search this Thread | Display Modes |
![]() |
#1 |
Member
Join Date: May 23rd, 2008
Location: northumberland, uk
Posts: 97
|
![]()
Hi all
Does anyone know where I can get replacement canti studs for my Yo fork and what size and thread pitch they are?? I have M10 and M8 in my tool box but neither will fit. The ones I have have all come from alloy suss forks and I guess are course thread. Cheers Si |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: October 23rd, 2004
Location: Athens, Ga USA
Posts: 415
|
![]()
I got a pair for my nuke proof from a guy on ebay who makes ti ones. He had a range of threads at the time. It took two tries to get the right threading. Unfortunately I dont have a record of the transaction.
|
![]() |
![]() |
![]() |
#3 | |
Senior Member
Join Date: March 25th, 2006
Location: Tracerse City Michigan
Posts: 302
|
![]() Quote:
DC
__________________
Time to clean my Pizootie Gusset |
|
![]() |
![]() |
![]() |
#4 |
Member
Join Date: May 23rd, 2008
Location: northumberland, uk
Posts: 97
|
![]()
Thanks DC. i will call my local framebuilder in the morning and see if he can help out.
Si |
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: January 7th, 2007
Location: Hudson, MA
Posts: 425
|
![]()
The outer thread on the bottom of the canti stud is an Acme thread. I don't recall here at my desk if they are 5/16" or 1/4". I think I may have a couple of them left at home. I can check the dimensions later and let you know.
According to my Machinery's Handbook, the 1/4" size has 16 threads per inch with a pitch of 0.0625. The 5/16" size has 14 threads per inch with a pitch of 0.0714. Hope this helps Scott Bengtson |
![]() |
![]() |
![]() |
#6 |
Member
Join Date: May 23rd, 2008
Location: northumberland, uk
Posts: 97
|
![]()
Thanks Scott, if you could measure up for me that would be great.
Cheers Si |
![]() |
![]() |
![]() |
#7 | |
Member
Join Date: February 23rd, 2009
Location: Melbourne Austrlia
Posts: 36
|
![]() Quote:
I have the same problem. I thought they were M8x1.5 but maybe they're not!? Rody has milled some M8x1.5s for me, but have not yet arrived in the post (damn USPS/Australia Post). Now Scott seems to think they are Imperial? anyone got a spare pair I can grab off them (behind Dr S of course). cheers |
|
![]() |
![]() |
![]() |
#8 |
Member
Join Date: May 23rd, 2008
Location: northumberland, uk
Posts: 97
|
![]()
There is a guy in Germany that makes them. they are indeed 5/16 UNC. He's really helpful and will ship worldwide. he also sells on eBay
http://www.brake-stuff.com/ Good luck. |
![]() |
![]() |
![]() |
#9 | |
Member
Join Date: February 23rd, 2009
Location: Melbourne Austrlia
Posts: 36
|
![]() Quote:
Canti studs Edit: "Es gibt keinen Spediteur der an diese Adresse liefern w |
|
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | Search this Thread |
Display Modes | |
|
|