Raceface Turbine on a Yo--what spindle length?

yo-Nate-y · October 29th, 2009, 5:09 PM

I am looking to swap out the old XTs on a Yo Eddy for a set of RaceFace Turbine cranks and some new rings. Does anyone here know what spindle length is best for the RF cranks and the clearance needs of a Yo Eddy?

Thanks for any help! I am stoked on the project. New (used) Chris King wheels I picked up for a song. Still have to get a 8 speed cassette, but I plan to use the old XT long cage RD and try the ghost click set up

IF52 · October 29th, 2009, 11:11 PM

Hey Nate,

I think either 107 or 113, I don't recall which. I had a silver set of Turbines on my Yo for a little while, and I think I had a 107mm bb in the frame at the time. I'll rummage around tomorrow and see if I can find the one I was using.

yo-Nate-y · October 30th, 2009, 12:26 AM

great, thanks!

IF52 · October 31st, 2009, 11:30 AM

OK, I'm not 100% sure but I think it was a 107. I put Bullseyes on the Yo after the Turbines and then I think I used that BB to put a set of M900s on the Monster.

yo-Nate-y · October 31st, 2009, 6:33 PM

Cool, thanks----I think I scrounged up some google-info that said 107-113. I'll see what I get my hands on first, and stick with the XT's still then.

lucifer · November 2nd, 2009, 9:53 AM

I have the instructions at home. If you bear with me I should be able to tell you exactly.
I believe it was 107 for compact cranks and 110-112 for standard sized ones.

yo-Nate-y · November 2nd, 2009, 10:40 AM

Fantastic, thanks!

October 29th, 2009, 5:09 PM	#1
yo-Nate-y Global Moderator Join Date: March 12th, 2009 Location: Tucson Posts: 809	Raceface Turbine on a Yo--what spindle length? I am looking to swap out the old XTs on a Yo Eddy for a set of RaceFace Turbine cranks and some new rings. Does anyone here know what spindle length is best for the RF cranks and the clearance needs of a Yo Eddy? Thanks for any help! I am stoked on the project. New (used) Chris King wheels I picked up for a song. Still have to get a 8 speed cassette, but I plan to use the old XT long cage RD and try the ghost click set up

October 29th, 2009, 11:11 PM	#2
IF52 Senior Member Join Date: October 1st, 2006 Location: Ohio USA Posts: 414	Hey Nate, I think either 107 or 113, I don't recall which. I had a silver set of Turbines on my Yo for a little while, and I think I had a 107mm bb in the frame at the time. I'll rummage around tomorrow and see if I can find the one I was using. __________________ M.O.M. Keep your mudflaps down

October 31st, 2009, 11:30 AM	#4
IF52 Senior Member Join Date: October 1st, 2006 Location: Ohio USA Posts: 414	OK, I'm not 100% sure but I think it was a 107. I put Bullseyes on the Yo after the Turbines and then I think I used that BB to put a set of M900s on the Monster. __________________ M.O.M. Keep your mudflaps down

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

October 30th, 2009, 12:26 AM	#3
yo-Nate-y Global Moderator Join Date: March 12th, 2009 Location: Tucson Posts: 809	great, thanks!

October 31st, 2009, 6:33 PM	#5
yo-Nate-y Global Moderator Join Date: March 12th, 2009 Location: Tucson Posts: 809	Cool, thanks----I think I scrounged up some google-info that said 107-113. I'll see what I get my hands on first, and stick with the XT's still then.

November 2nd, 2009, 9:53 AM	#6
lucifer Senior Member Join Date: October 23rd, 2004 Location: Athens, Ga USA Posts: 415	I have the instructions at home. If you bear with me I should be able to tell you exactly. I believe it was 107 for compact cranks and 110-112 for standard sized ones.

November 2nd, 2009, 10:40 AM	#7
yo-Nate-y Global Moderator Join Date: March 12th, 2009 Location: Tucson Posts: 809	Fantastic, thanks!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)