![]() |
|
Builder's Corner Restoration and preservation. Keep them running in perfect shape. What size is your bottom bracket? |
![]() |
|
Thread Tools | Search this Thread | Display Modes |
![]() |
#1 |
New Member
Join Date: May 7th, 2008
Location: Gainesville , FL
Posts: 2
|
![]()
First post here so bear with me. I am the original owner of an 85 Fat #85427. and I am in the process of bringing it back to life after some (believe it or not) flood damage. At the moment I am dealing with a stuck seat post (no fun at all, but I'm close). Next is repainting and finally a new bottom bracket. Any suggestions? The BB shell appears to b be 650 so I doubt the Phil press in would fit, the original spindle is in good shape as are the collars, but the bearings are shot. Any replacement press ins out there anywhere? Any other ideas? Thanks.
![]() |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: July 21st, 2007
Location: Newbury Park, CA
Posts: 169
|
![]() |
![]() |
![]() |
![]() |
#3 |
New Member
Join Date: May 7th, 2008
Location: Gainesville , FL
Posts: 2
|
![]()
Many thanks Rody, problem solved. I will contact Groovy shortly after the repaint. I will register and post pics as well! Great forum!
|
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | Search this Thread |
Display Modes | |
|
|