![]() |
|
Builder's Corner Restoration and preservation. Keep them running in perfect shape. What size is your bottom bracket? |
![]() |
|
Thread Tools | Search this Thread | Display Modes |
![]() |
#1 |
Senior Member
Join Date: June 8th, 2006
Location: The O.C.
Posts: 370
|
![]()
Hey,
wondering if anyone else is running Suntour XCPro cranks on a Yo? if so, could you forward the bottom bracket spindle width. i thought i measure the old one before i swapped them out - but in looking at the new one it looks way to wide. much appreciated, Sette |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: October 1st, 2006
Location: Ohio USA
Posts: 414
|
![]()
I don't know what you should use on the Fat, but I had a non MD set on my wifes BREW with a 122.5mm XT BB for a while and before that on her 92 Litespeed with a 125mm Phil BB. Chainline was fine with those spindle lengths on those frames.
__________________
M.O.M. Keep your mudflaps down |
![]() |
![]() |
![]() |
#3 | |
Senior Member
Join Date: June 8th, 2006
Location: The O.C.
Posts: 370
|
![]() Quote:
i think i got a 122 for it. but now that it is bolted up it seems like the drive side is too far away from the frame. the front derailleur cannot move the chain into the small ring??? not sure what is going on, Sette |
|
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | Search this Thread |
Display Modes | |
|
|