wicked fat chance questions

fiatjeepdriver · December 17th, 2007, 12:37 PM

http://bend.craigslist.org/bik/509452716.html

is this a fair price for an 89 wicked fat chance? i know they are not the most expensive of the fat city bikes but i think it would be a fun bike to have a nicer rigid mtb in my stable. thanks in advance.

settemarche · December 17th, 2007, 4:57 PM

jump on it. or at the very least have a look at it. rust is a killer so have a look at the seat tube. Pac NW is not a kind place to steel bikes. but that one looks for the most part complete. cranks and a wheelset should be easy to source. the spare fork you can sell to recoup some of the purchase price.

Sette

fiatjeepdriver · December 17th, 2007, 5:23 PM

thank you for your response. i plan on going to see it tomorrow and if it is in good shape it looks like i will have a fun winter project to build up.

colker · December 17th, 2007, 5:33 PM

same color and size as mine. the red shines like glitter in the sun. you know you won't have a regular caretridge BB there. it's a bit of a pain to get new stuff but it's perfectly doable.

fiatjeepdriver · December 18th, 2007, 2:38 AM

thanks again guys. colker i did not realize it would be a press in bb (though i didnt really think about it) i was kind of hoping to use my xtr m952 crankset on this bike but i guess there are others out there. i am going to look at the frame tomorrow so i will give it a close look to make sure there is no rust. if i get it ill be sure to post better pics here and ask for some build recs.

colker · December 18th, 2007, 10:49 AM

Quote:

Originally Posted by fiatjeepdriver

thanks again guys. colker i did not realize it would be a press in bb (though i didnt really think about it) i was kind of hoping to use my xtr m952 crankset on this bike but i guess there are others out there. i am going to look at the frame tomorrow so i will give it a close look to make sure there is no rust. if i get it ill be sure to post better pics here and ask for some build recs.

you could get a 107mm spindle and have those m900 cranks. am i correct here? can you find a 107 spindle for a Fat?

December 17th, 2007, 12:37 PM	#1
fiatjeepdriver Member Join Date: December 17th, 2007 Location: Oregon Posts: 62	wicked fat chance questions http://bend.craigslist.org/bik/509452716.html is this a fair price for an 89 wicked fat chance? i know they are not the most expensive of the fat city bikes but i think it would be a fun bike to have a nicer rigid mtb in my stable. thanks in advance.

December 17th, 2007, 5:33 PM	#4
colker Senior Member Join Date: June 1st, 2006 Location: rio de janeiro Posts: 1,012	same color and size as mine. the red shines like glitter in the sun. you know you won't have a regular caretridge BB there. it's a bit of a pain to get new stuff but it's perfectly doable. __________________ wanted: ride time.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

December 17th, 2007, 4:57 PM	#2
settemarche Senior Member Join Date: June 8th, 2006 Location: The O.C. Posts: 370	jump on it. or at the very least have a look at it. rust is a killer so have a look at the seat tube. Pac NW is not a kind place to steel bikes. but that one looks for the most part complete. cranks and a wheelset should be easy to source. the spare fork you can sell to recoup some of the purchase price. Sette

December 17th, 2007, 5:23 PM	#3
fiatjeepdriver Member Join Date: December 17th, 2007 Location: Oregon Posts: 62	thank you for your response. i plan on going to see it tomorrow and if it is in good shape it looks like i will have a fun winter project to build up.

December 18th, 2007, 2:38 AM	#5
fiatjeepdriver Member Join Date: December 17th, 2007 Location: Oregon Posts: 62	thanks again guys. colker i did not realize it would be a press in bb (though i didnt really think about it) i was kind of hoping to use my xtr m952 crankset on this bike but i guess there are others out there. i am going to look at the frame tomorrow so i will give it a close look to make sure there is no rust. if i get it ill be sure to post better pics here and ask for some build recs.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)