To install a 1" fork to a 1 1/8" steerer tube.

bonsaii · August 12th, 2007, 5:36 AM

As the title says; is this possible? Does it exist a steerer bearing that has a 1" inner ring, to fit 1" fork, and 1 1/8" outer ring to fit the frames steere tube?

I bought a Betty for my wife a few years back and mounted an Judy shock on. The Judy is enormously large to the small Betty frame. I have an original 93' 1" Eddy fork I would love to put on the Betty.

I did some investigation, but could'nt find the bearing I was looking for, so a last attemt here at Fatcogs..

All replys will be very much appreciated!

Cheers!

fat-tony · August 12th, 2007, 7:05 AM

Look for a Chris King conversion kit. You can still buy these from Chris King. It allows you to use 1" steerer tube fork on a 1 1/8' headtube.

Yo Eddy! · August 12th, 2007, 9:59 AM

Hi,

I've fitted a 1" Switchblades into a frame with 1-1/8" headtube. Into the frame cups have been pressed that enable the use of a 1" headset. By taking a closer look the pic should show you it =>

Yo Eddy! · August 12th, 2007, 10:04 AM

Hi,

Me again

For example this people make them => http://www.reset-racing.de/reset/sondersteuer_index.htm

Scroll down

bonsaii · August 14th, 2007, 4:20 AM

Ok guys, thanks for fast and very good replys!

The absolute best soulution is to get the 1 1/8" Yo fork, but these does not grow on trees nowadays.

August 12th, 2007, 5:36 AM	#1
bonsaii Senior Member Join Date: May 26th, 2005 Location: Lommedalen, Norway Posts: 244	To install a 1" fork to a 1 1/8" steerer tube. As the title says; is this possible? Does it exist a steerer bearing that has a 1" inner ring, to fit 1" fork, and 1 1/8" outer ring to fit the frames steere tube? I bought a Betty for my wife a few years back and mounted an Judy shock on. The Judy is enormously large to the small Betty frame. I have an original 93' 1" Eddy fork I would love to put on the Betty. I did some investigation, but could'nt find the bearing I was looking for, so a last attemt here at Fatcogs.. All replys will be very much appreciated! Cheers!

August 12th, 2007, 7:05 AM	#2
fat-tony Global Moderator Join Date: October 13th, 2004 Location: birmingham, al - usa Posts: 720	yes Look for a Chris King conversion kit. You can still buy these from Chris King. It allows you to use 1" steerer tube fork on a 1 1/8' headtube.

August 12th, 2007, 9:59 AM	#3
Yo Eddy! Senior Member Join Date: July 16th, 2004 Location: Netherlands Posts: 638	Hi, I've fitted a 1" Switchblades into a frame with 1-1/8" headtube. Into the frame cups have been pressed that enable the use of a 1" headset. By taking a closer look the pic should show you it => __________________ Melvin Yo rider, Wicked attitude

August 12th, 2007, 10:04 AM	#4
Yo Eddy! Senior Member Join Date: July 16th, 2004 Location: Netherlands Posts: 638	Hi, Me again For example this people make them => http://www.reset-racing.de/reset/sondersteuer_index.htm Scroll down __________________ Melvin Yo rider, Wicked attitude

August 14th, 2007, 4:20 AM	#5
bonsaii Senior Member Join Date: May 26th, 2005 Location: Lommedalen, Norway Posts: 244	Ok guys, thanks for fast and very good replys! The absolute best soulution is to get the 1 1/8" Yo fork, but these does not grow on trees nowadays. __________________ 90' wicked blue black 18" (00149W) 92' yo eddy team jersey (539Y2MS) 93' titanium (049T3M) 93' monster fat aquafade (025M3M) 94' buck shaver metallic charcoal (134B4S) 98' yo betty! raspberry ice (YB 14 044)

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode