![]() |
|
Builder's Corner Restoration and preservation. Keep them running in perfect shape. What size is your bottom bracket? |
![]() |
|
Thread Tools | Search this Thread | Display Modes |
![]() |
#1 |
Senior Member
Join Date: December 7th, 2006
Location: Goettingen, Germany
Posts: 101
|
![]()
Hey Guys
I'm rebuliding a '94 Yo Eddy. I'm quite sure that I do need a one inch fork! PLEASE correct me, if I'm wrong! And next question: What size do I need for the bottom bracket? That's a lot in advance! cheers YoKris |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: June 1st, 2006
Location: rio de janeiro
Posts: 1,043
|
![]()
yes. 1in for 94 and the bottom bracket is 68mm. spindle size depends on your crankset.
|
![]() |
![]() |
![]() |
#3 |
Senior Member
Join Date: January 24th, 2006
Location: Maybe it was Utah?
Posts: 117
|
![]()
If you're going old school dog-bone Cooks cranks than you'll be looking at a bb spindle of around 122 to 127mm. I have 'em on my 91 Yo and am using a 127mm bb spindle if that helps. If you're wanting to use a newer "low profile" crankset than certainly you'll want a shorter spindle, somewhere in the neighborhood of 113 to 118mm.
Chickiddy-checkit... http://www.fatcogs.com/forum/showthr...ighlight=yo+bb
__________________
BAM! Last edited by Jack Lantern; January 25th, 2007 at 9:03 PM. |
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | Search this Thread |
Display Modes | |
|
|