Hello!
A bit of help needed....
I managed to get hold of a black Wicked frame (# 13099W) with siezed in and worn press fit bearings. Soaked and removed, these are marked on the red seals NTN s00228lu and there is a retaining c-clip on each side of the BB shell and the shell itself seems to be only 63mm wide which seems bizarre.
I know this topic has been covered in older threads but wondered if there are any UK specific up to date options for replacing the BB without spending a fortune.
I am really excited to build up my first Fat Chance and may start selling other bikes and bits to finance.
Thanks for your eyes and minds!
:santa:
A bit of help needed....
I managed to get hold of a black Wicked frame (# 13099W) with siezed in and worn press fit bearings. Soaked and removed, these are marked on the red seals NTN s00228lu and there is a retaining c-clip on each side of the BB shell and the shell itself seems to be only 63mm wide which seems bizarre.
I know this topic has been covered in older threads but wondered if there are any UK specific up to date options for replacing the BB without spending a fortune.
I am really excited to build up my first Fat Chance and may start selling other bikes and bits to finance.
Thanks for your eyes and minds!
:santa: