• All For Sale Adverts Must Have A Price !

FCC Box crown fork

AB

Active member
For Sale: 80’s Box Crown fork, excellent used condition threaded 1” steerer tube measures 5 3/16” long. Campagnolo dropouts. More photos available in photo album in my profile. $750.00 plus shipping.
 

Attachments

  • 0819DE8B-93EC-48A8-8BBA-D42ECF15B0BD.jpeg
    0819DE8B-93EC-48A8-8BBA-D42ECF15B0BD.jpeg
    88.9 KB · Views: 145
  • 586C9A30-CA1D-43F3-891E-1FFC22BE80EB.jpeg
    586C9A30-CA1D-43F3-891E-1FFC22BE80EB.jpeg
    82.1 KB · Views: 103
  • 850735EF-2DAC-4706-BAB0-4FCFDD1DADD5.jpeg
    850735EF-2DAC-4706-BAB0-4FCFDD1DADD5.jpeg
    92.8 KB · Views: 87
  • E5D857DD-5F9E-4722-B431-92B4E124108C.jpeg
    E5D857DD-5F9E-4722-B431-92B4E124108C.jpeg
    92.7 KB · Views: 80
  • 380D1298-FEF9-4E5E-8C6B-8C7CA1E5D692.jpeg
    380D1298-FEF9-4E5E-8C6B-8C7CA1E5D692.jpeg
    76.8 KB · Views: 72
  • C7ED290E-ACA0-4F22-81E8-67DA2B677664.jpeg
    C7ED290E-ACA0-4F22-81E8-67DA2B677664.jpeg
    102.1 KB · Views: 76
  • A9399CA5-3232-4172-B776-6CE0A2D9BC5B.jpeg
    A9399CA5-3232-4172-B776-6CE0A2D9BC5B.jpeg
    97.7 KB · Views: 89

I-ROBOT

Active member
Scott..any idea ?:confused:

Hi Gang
It has been a very busy summer. Started a new job in June and have been working on my never-ending porch renovation.

If that box crown is welded, it is most likely Tange Prestige.

Hope everyone is well
Scott
 

I-ROBOT

Active member
Hello Gang!
Was reading through this so I measured my box crown fork. It appears that you measured from the very top of the crown race. I measured mine in the same manner and it is 4.875" (4-7/8"). My Wicked is an 18" and the 16.5"s used the same head tube and forks. I would say that yours came off of a 19.5" but could fit an 18" by stacking the headset (which will raise the handlebar height) or carefully cutting the threaded section (don't ask me to weld it back on if you eff it up). Mine also has the rifled Columbus steerer tube but no gussets. Some of the early ones did crack at the back of the fork tube to crown weld joint and that is why later versions (and any that were repaired) are gusseted. Unfortunately, forks were not serialized in any way, so there is no way of telling the date of manufacture or if its even genuine (although I believe this one is). The ride quality of the box crown is what sets it apart from all other rigid forks of its era. The road blades give it a suppleness and the straight stance gives it the needed tire clearance and surefootedness that others tried to match but never could.

Used ones in that good of condition are now quite rare.

Best of luck
Scott
 

AB

Active member
Hi Scott - Thanks for your reply. I measured the fork again from the top of the crown race and it comes out to 5 3/16" exactly.
 

AB

Active member
Thanks for your interest, but currently the fork is not for sale as I rethink using it on a 1991 Merlin which has an old Rock Shox.

However, I will be posting a 1987 all original Wicked for sale soon - excellent condition XT build. Unicrown fork on the Wicked.
 

Stingercut

Active member
“The ride quality of the box crown is what sets it apart from all other rigid forks of its era. The road blades give it a suppleness and the straight stance gives it the needed tire clearance and surefootedness that others tried to match but never could”

That just sums up FATs and their original fork designs right there. FATs are often copied but never bettered.
 
Top