WTD: 127.5mm press-fit BB axle

gradeAfailure

New member
Hi guys, before I splash out on a Phil Woods axle I thought I'd see if anyone here has one? Got some Toplines and the 122.5mm axle I have is too short so looking for a 127.5 for the press-fit BB.

Thanks!
 

jh4rt

New member
Hi guys, before I splash out on a Phil Woods axle I thought I'd see if anyone here has one? Got some Toplines and the 122.5mm axle I have is too short so looking for a 127.5 for the press-fit BB.

Thanks!

If you order the Phil Axle, make sure you order the Phil bearings as well. The Phil axles are larger in diameter; won't fit in . Also, the Phil bearings don't have the "c-clip"; just press flush.
 
Top