Yep, the locking collars hold the spindle in place.
Loosen both collars, gently give a tap on one side of the spindle/crank to position, then pressure the collars towards the center of the bb and tighten down.
cheers,
rody
Thanks for the info Rody! I'll be taking those measurements this weekend of my 85 Drop BarFat.Yep, the locking collars hold the spindle in place.
Loosen both collars, gently give a tap on one side of the spindle/crank to position, then pressure the collars towards the center of the bb and tighten down.
cheers,
rody
... those are Imperial/SAE allen bolts on there - not Metric!