|
|
|||||||
| Gatherings, Rides & Events Meet up with other Cogs, who need group support, just like you. |
 |
|
|
Thread Tools | Search this Thread | Display Modes |
November 20th, 2012, 1:07 PM
|
#1 |
|
Senior Member
Join Date: March 15th, 2010
Location: Naperville IL
Posts: 716
|
because I am...
I got sick of looking at the fork compatibility post. So here is my event of one...
25 miles on Large Ed in mid November. Pic is nice and blurry, will post better down the road |
|
|
|
November 20th, 2012, 2:24 PM
|
#2 |
|
Senior Member
Join Date: June 1st, 2006
Location: rio de janeiro
Posts: 1,043
|
Good post!
__________________
wanted: ride time. |
|
|
|
|
November 20th, 2012, 6:38 PM
|
#3 |
|
Member
Join Date: March 15th, 2012
Location: Mass
Posts: 64
|
Hate to ask after the demise of the fork compatibility thread, but..... What fork is that?
|
|
|
|
|
November 20th, 2012, 8:29 PM
|
#4 |
|
Senior Member
Join Date: March 15th, 2010
Location: Naperville IL
Posts: 716
|
the fork is a Kona Project 2 in one inch variety...
it will only work well in my opinion on a YO eddy that has been suspension corrected 1992 or newer this one is the fork is 410mm A to C with 38mm offset I have tried it on a suspension corrected wicked and it was not ideal... it's too long for non corrected bikes in my opinion... hope this helps, this one is temporary until i get an Igleheart made. |
|
|
|
|
November 20th, 2012, 9:42 PM
|
#5 |
|
Senior Member
Join Date: June 1st, 2006
Location: rio de janeiro
Posts: 1,043
|
I've seen the wicked lite on the 1994 catalog where it says it's suspension corrected; it's unicrown fork seems to be the same length as every other wicked.
__________________
wanted: ride time. |
|
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
