WTB Medium Fat TI

Stimy · February 18th, 2019, 9:03 PM

Looking for an early Fat ti medium frame or bike I would like the frame with the seattube that was doubled up at the bottom bracket if possible! Please let me know Thank You Ed

I-ROBOT · February 20th, 2019, 12:29 PM

Hello

None of the seat tubes were butted or sleeved at the bottom bracket. The seat tubes had a welded insert at the top to allow for reaming to the correct size for seat post insertion and to add strength at that area.

The early downtubes were sleeved at the bottom bracket. I believe that this is what you are thinking of.

Good Luck in your search

Scott

Stimy · February 20th, 2019, 1:26 PM

Yes that is what I meant I remember one sitting in the window of a local shop and the bottom bracket to seat tube connection is still etched in my mind......

Stingercut · February 20th, 2019, 2:48 PM

Like this.

Stimy · February 20th, 2019, 3:14 PM

I kind of remember the seat tube having the same but maybe memory is fading ....

Retro Dude · February 21st, 2019, 3:01 PM

I have a 96/97? Medium Ti Fat that I have been contemplating selling, send me a message if you're interested.

UBWINE · March 19th, 2019, 10:01 AM

I have a 2000 Ti Fat medium that I would part with. Let me know if you are still in the market and I can send you some info and pictures. I am located in the North bay.

February 18th, 2019, 9:03 PM	#1
Stimy New Member Join Date: October 1st, 2018 Location: Foster City Posts: 3	WTB Medium Fat TI Looking for an early Fat ti medium frame or bike I would like the frame with the seattube that was doubled up at the bottom bracket if possible! Please let me know Thank You Ed

February 21st, 2019, 3:01 PM	#6
Retro Dude Senior Member Join Date: September 5th, 2011 Location: Clay Posts: 512	I have a 96/97? Medium Ti Fat that I have been contemplating selling, send me a message if you're interested. __________________ inFATuated

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

February 20th, 2019, 12:29 PM	#2
I-ROBOT Senior Member Join Date: January 7th, 2007 Location: Hudson, MA Posts: 426	Hello None of the seat tubes were butted or sleeved at the bottom bracket. The seat tubes had a welded insert at the top to allow for reaming to the correct size for seat post insertion and to add strength at that area. The early downtubes were sleeved at the bottom bracket. I believe that this is what you are thinking of. Good Luck in your search Scott

February 20th, 2019, 1:26 PM	#3
Stimy New Member Join Date: October 1st, 2018 Location: Foster City Posts: 3	Yes that is what I meant I remember one sitting in the window of a local shop and the bottom bracket to seat tube connection is still etched in my mind......

February 20th, 2019, 3:14 PM	#5
Stimy New Member Join Date: October 1st, 2018 Location: Foster City Posts: 3	I kind of remember the seat tube having the same but maybe memory is fading ....

March 19th, 2019, 10:01 AM	#7
UBWINE New Member Join Date: May 8th, 2018 Location: California Posts: 4	I have a 2000 Ti Fat medium that I would part with. Let me know if you are still in the market and I can send you some info and pictures. I am located in the North bay.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)