View Single Post
Old May 12th, 2015, 10:20 AM   #4
one piece crank
Member
 
Join Date: June 3rd, 2009
Location: NJ
Posts: 18
Default

The collar on my non-drive-side just split too. Bummer they are NLA.

However, back in the day, Cooks Bros used to offer BB's with a similar smooth spindle and collars. The cool set-up was to stack spacers on the drive-side, and use only one collar on the non-drive side. For the "factory" set-up, you would measure the non-drive-side spacing (as accurately as possible), then fit a spacer stack in place of the remaining collar. Viola - perfectly set-up, no-collar BB!

Last edited by one piece crank; May 12th, 2015 at 11:20 AM.
one piece crank is offline   Reply With Quote