Suntour XC Pro Crank Questions

settemarche

New member
Hey,

wondering if anyone else is running Suntour XCPro cranks on a Yo? if so, could you forward the bottom bracket spindle width. i thought i measure the old one before i swapped them out - but in looking at the new one it looks way to wide.

much appreciated,

Sette
 

IF52

New member
I don't know what you should use on the Fat, but I had a non MD set on my wifes BREW with a 122.5mm XT BB for a while and before that on her 92 Litespeed with a 125mm Phil BB. Chainline was fine with those spindle lengths on those frames.
 

settemarche

New member
I don't know what you should use on the Fat, but I had a non MD set on my wifes BREW with a 122.5mm XT BB for a while and before that on her 92 Litespeed with a 125mm Phil BB. Chainline was fine with those spindle lengths on those frames.

IF,

i think i got a 122 for it. but now that it is bolted up it seems like the drive side is too far away from the frame. the front derailleur cannot move the chain into the small ring???

not sure what is going on,

Sette
 
Top